Introduction of LA133 aqueous binder

Applicable for all kinds of cathode and anode materials

     LA133 aqueous binder is the water dispersion of acrylonitrile multi-copolymer, it has good antioxidant and anti-reduction ability and can be applied to a variety of cathode and anode materials(including LiCoO₂、LiMn₂O₄ and LiFePO₄ cathode material、carbon anode material and activated carbon)

LA133 has a relatively high viscosity compared to LA132 and has a better suspension ability to powder materials. 

LA133 aqueous binder has high viscosity and pure quality, thickener and organic solvent are not needed while using it, so the cost of materials can be reduced effectively, at the same time, the environmental pollution caused by solvent-based binder during the production of lithium-ion battery and poor safety can also be effectively avoided.

The lithium-ion battery which uses LA133 aqueous binder has excellent cycle performance and rate capability, the cell polarization is slight.

      Product specifications

         Precautions

      1. Adjust the consistency of slurry by adding water to avoid the edge folding phenomenon of slurry.

      2. The small bubbles formed during the process of stirring can be eliminated by vacuum defoaming or adding a small amount of alcohol or n-butyl alcohol. 

      3. The content of binder in the negative electrode is suggested 2～5%,positive is 1.5～4%(lithium iron phosphate can appropriately increase the amount of binder).

      4. After drying the electrode, cool it in the air before rolling, cutting and winding.

      5. Fully dry to eliminate the absorbed water before injecting liquid to the battery.

      6. In shelf life, it is normal that the viscosity of product increases as time goes by.